I’m pretty sure I’d be ok in multiple realities

So if you’ve had chickenpox your predisposed, not immune?

This iOS app does that automatically, for the UK at least.

https://apps.apple.com/gb/app/shopping-uk/id771220733

Nice! Maybe I should post my experiences from turning 40 onwards!

This is why I try to make every moment special with them and give them the happiest life possible. It doesn’t make it hurt less, but you can know that you made one souls life as perfect as possible and you loved them with all your heart.

Many a Kerbal has been left in a face down lander on the Mun. Don’t feel bad Japan.

It’s just being smart about your word choices. I start off with two words that cover the 10 most common letters: ANODE, SHIRT. Don’t think I have the perfect third word yet, but I’m currently using FLUMP and sometimes CLUMP

Who wants to do the exact maths to work out the sea level rise of all of this melting? My back of an envelope calculation gives me 4cm, but happy to be proved wrong! I did 1600km3 over 75% of 510,000,000km2

I also found a huge difference between filaments. Creality was terrible for me, Reflow is great

This really summarises the passive aggressive level you get to with a 3D printer: “Lift off the bed now you little fucker!”

So a combination of three changes finally got me back the correct result.

1. Changed the nozzle for a brand new one, that helped a lot but still had a fee issues.
2. Remeasured my extrusion amount and recalibrated the e-steps, they had gone quite a way out.
3. Reduced the temp by 10°C apart from the first layer.

Thanks for your help!

So a combination of three changes finally got me back the correct result.

1. Changed the nozzle for a brand new one, that helped a lot but still had a fee issues.
2. Remeasured my extrusion amount and recalibrated the e-steps, they had gone quite a way out.
3. Reduced the temp by 10°C apart from the first layer.

Thanks for your help!

So a combination of three changes finally got me back the correct result.

1. Changed the nozzle for a brand new one, that helped a lot but still had a fee issues.
2. Remeasured my extrusion amount and recalibrated the e-steps, they had gone quite a way out.
3. Reduced the temp by 10°C apart from the first layer.

Thanks for your help!

I will check that, I hope its that as that would be an easy fix. Also I only use matte filament.

When you say pressure of the z-axis, do you know what they meant exactly? Not sure it could be temp as it’s the same, however I did change the part cooling fan in case that was faulty and the material wasn’t cooling fast enough

Dead man’s bones

I get this on the web interface of my 3D print server. Occasionally come back in a few hours having printed the wrong file…

Traditional I would be working on a freelance basis with companies and teams that would only use adobe, and wanted files in those formats. Though as I’m doing more and more of work just for myself the alternatives are getting more tempting.

Yeh, I use 4 applications from Adobe in very limited amounts. I wish they did a pay as you use subscription! If you use them all every day it’s cheap, but I maybe use them about 10-15 hours per month at the most.

Nice try robots! I’m not helping you learn how to fool us humans.